top of page

3-in-1 Covers

A 3-in-1 cover has a rope in the hem to use as a quick dust cover, it has snaps mounted under the rub rail so it can be used while at a dock when mooring, a ratchet at the rear and trailering tabs for extra security and peace of mind while trailering long distance at high speeds. You can choose to have all of these options on your cover, or not.  Each cover comes with adjustable poles to give it the perfect pitch required to shed water.  Vents are mounted on top of each pole so any moisture can escape from inside of the cover.  If you don't trailer often we can custom make removable trailering straps for use with your cover.  Reinforcement patches are sewn on the inside of the cover where there is anything that may cause frictional wear.

 

As a custom shop we can make your cover in pretty much any marine grade material that you would like.  However, we highly recommend Aqualon® Edge for multiple reasons.  Aqualon® Edge is an extremely strong, light weight, long lasting and waterproof fabric with a long proven track record. Unlike a lot of the woven acrylic fabrics on the market, Aqualon Edge does not shrink when dry nor sag when wet, which makes aligning the snaps upon installation easier for you. It has a soft white polyester backing that will not scratch or leave any color marks on any part of your boat and it comes with one of the best warranties in the industry.  Aqualon® Edge comes with it's own 7 year manufacturer's warranty and we provide a limited lifetime warranty on all of our covers made from Aqualon® Edge and our PTFE (marine coated) thread against any and all fabrication defects.  It doesn't matter if your cover is 20 plus years old, as long as your cover is serviceable we will repair the seam that's giving way, missing snap, or a dart that's coming loose (on the spot whenever possible) for no charge. 

​

As part of the custom design process for your cover, we will discuss how you plan on using it and walk you through the process of using each type of cover, to ensure it meets your expectations.  Your cover can be held on with just a rope in the hem, or snaps along the outer edge or trailer tabs with straps - or, our most popular option, all 3.  We can make your straps adjustable as well as removable if you want.  We can make your cover so it goes over, under or around a trolling motor.  We can add mooring cleat access flaps, gas access flaps, zipper access panels... whatever you dream up, we can make happen. Each method comes with its own pros and cons, which we can discuss with you upon drop-off of your boat.

​

All covers are made by appointment only and typically take a week at the most, to complete.  The work involved in creating your custom cover is done here at our shop - none of it is farmed out.  To make an appointment we require a $350 deposit, which is refundable up to a week in advance of your originally scheduled appointment date, and your date can be changed at any time based on availability.

​

Call us at 715-479-3414 to check availability, pick a date and and make arrangements for your deposit - we are happy to answer any questions you may have!

 

 

All our covers are made with Aqualon® Edge, a new product from Trivantage®, featuring Perfecta Marine® technology.  Aqualon® Edge with Perfecta Marine technology provides superior heat reduction and heat reflection, and exceptional UV performance. Featuring innovative technology and these enhanced benefits, Trivantage offers an industry leading 7-year warranty for this hybrid coated fabric.

 

Aqualon® and Trivantage® are registered trademarks of Glen Raven, Inc. Perfecta Marine® is a registered trademark of Graniteville Specialty Fabrics.

bottom of page